How to Clean White Shoes with Baking Soda and Water?

Do your white shoes not appear as “white” anymore? Is it staining? Does the color change to a little bit brownish?

Chances are the dirty white shoes also have the unfriendly odor that will drive everyone away. The smell could lead to many problems including feet infection. That’s why it is always recommended to clean and maintain your shoes on a regular basis so that you can wear white shoes in their best condition.

However, when you already used the shoes too many times, these color changing is difficult to clean. Don’t worry about it. We have the solution tips for you.

Let’s start it by giving you the name of the main ingredient of the solution: baking soda. You surely stock some spices including baking soda in your kitchen.

The ingredients:

 

2 tbsp of baking soda

1 tbsp of hydrogen peroxide

1 tbsp of warm water

 

Tools that you need to prepared

Small scrub brush

How it works

Bleachers can sometimes ruin the materials of your white shoes. In many cases, the shoe outsoles and outer parts were broken because of the sturdy bleachers. It is because most of the commercial bleachers have chlorine in their contents.

Instead of using harmful chemicals and bleachers, you could use the hydrogen peroxide. The Hydrogen peroxide is an excellent replacement for bleach because it does not contain chlorine. When you mix it with baking soda, it will form the bubbles that are strong enough to remove stains and clean the fabrics from stubborn stains.

The method

First things first, you will want to clean your white shoes from the dry dust, dirt, and other particles. Then let it dry.

Mix all of the ingredients in an adequate size of the bowl. You know that this paste can dry if you leave it behind. So, when you are done mixing the ingredients, you must apply the paste to the surface of the shoes with the brush.

Remove the big pieces of the dirt. Make sure you de-lace the shoes before applying the paste. Gently brush the mixture onto the surface of the boots. You could also press just hard enough to remove the stubborn dirt. However, it would help if you even considered the quality of the fabric. If the material is too weak, don’t scrub too strong.

Scrub the affected areas which have the discoloration or stains. Let the paste sit there for thirty minutes at minimum. If you are living in a colder climate, you can let it for an hour or so. Wait until the dried solution becomes crackles. Then rinse with the lukewarm water. That’s it! You should see the great result if you did it the right way.

The thing about this method is that you will need to apply the paste if the stains or discoloration are too severe. Don’t worry, however. All you need to do is repeat the process we’ve mentioned before, and you are good to go. Alternatively, you could use the second coat of the paste without having to remove the first coat. Some folks even apply the third coat to let the shoes sit for three up to five hours on a sunny day. There’s no exact measurement when it comes to this because you probably have a different design of white shoes. With the simple method above, you will master it in no time.

 

Mark Hennon
 

I started this blog to provide advanced footwear; guiding you towards a better and more comfortable shoes picks experience. I deliver more than shoes gear guides, and motivate people to hit the world!

Click Here to Leave a Comment Below 0 comments